Showing posts with label baby monitor electrical interference. Show all posts
Showing posts with label baby monitor electrical interference. Show all posts

Saturday, January 19, 2013

Does a low signal strength make my connection worse in Modern Warfare 3 on PS3?

Q. I meant low signal strength from my router.

A. Yes. The lower the strength of the signal, the slower it will be.

To increase signal strength, you need to remove sources of EMI (electromagnetic interference) such as baby monitors, 2.4GHz phones, microwaves as well as possibly moving the router to a better spot to decrease dead zones in your coverage area. You can try moving the router closer to the PS3 if that's an option.

Other options include installing a bigger antenna, a directional antenna or adding a wireless access point.

And another way is to eliminate WiFi completely by using Powerline technology. You can use the electrical wires of your house to transmit data. You would need an adapter on each end, though.


My wifi is very slow at night, fast in morning?
Q. Recently my wifi started crawling at night, while connected speeds were normal, or above expected. Speedtest,net results used to top out at 9mbps, now connected is ~13, but wifi is ~1. Actually wifi starts at 2-3 mbps during the test but drops to around 1mbps by the end of the test.

I can try wifi in the morning and the speed is back to 13-14mbps.

I've reset the router, changed network names, but wifi is still slow in evenings while connected speeds are super fast.

This is a Cisco E1000 router. I disabled QOS which might prioritize certain items. The router shows only 2 connections, both of wich are mine.

Any help would be greatly appreciated.
Thanks for your responses so far. I will add that the network is password protected and i have confirmed via the router that there are only 2 connections, my desktop and iPad.

A. Assuming your wireless network is secured and you don't have leaches sucking up your bandwidth then I would suspect wireless interference.

By nature, interference in wireless systems causes problems with smooth, consistent speeds.

Many wireless connections experience interference from microwave ovens, cordless phones, baby monitors and other wireless devices which interfere with the 2.4 GHz band.

Dual band routers have multiple wireless radios enabling broadcast on the 2.4 GHz and 5 GHz bands simultaneously.

Using the 5 GHz band cuts down on interference from cordless phones and microwave ovens..

Not all devices can use the 5 GHz frequency. Many laptops and other devices only operate at 2.4 GHz. Thus the need for dual band routers.

What all this jargon means is that you might be experiencing wireless interference which is slowing do your WiFi connections.

Because your problem is time based, are there any heavy electrical loads that come on when you experience problems? Things such as heaters, air conditioners, pumps, etc.

You can try to reposition the antennas on the router or your wireless adapter.

Moving one or the other away from dense walls or electrical interference would also help.

Wireless connections are never as fast or consistent as wired connections. If your interference is on the 2.4 GHz band and your devices support 5 GHz then a new dual band router might help.

There are also various ways to extend a Internet connection to areas with a weak wireless signal.

Devices such as wireless extenders can expand your wireless range if need be. http://www.amazon.com/gp/product/B004YAYM06/ref=as_li_ss_tl?ie=UTF8&tag=excharge-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B004YAYM06

The wireless range extender receives weak wireless signals and repeats them to extend the signal range to greater distances. Some models include 4 Ethernet ports in addition to the wireless radio.

The best solution would be to use a wired (Ethernet) connection between your devices and the router.

If it is not feasible to run cables you have other options such as powerline network adapters You plug one in by the router and one in the room where you need access and connect them to the devices with standard Ethernet patch cables. http://isp1.us/reviews/netgear-xavb2101-powerline-adapter/

The network signals are transmitted over your existing home electrical wiring which will not be affected by wireless interference.

Good Luck...


What is up with this?!!?
Q. You know how certain electrical appliances will have static feedback when you move around them, or get close to them? Like radios for instance? For some reason, it is really, really bad with me. More than anyone I know. My baby monitor will fuzz in and out with my motions even when I am in a different room. I do have an extra electrical connection in my heart that causes an irregular beat. Do you think that has something to do with it?

A. Every living human on this planet has a small electrical current flowing through them.... but to generate the EM field to effect things to that degree is not only improbable but impossible if you are alive... some scientific tests may show slight interference from the human body but anyone with that level would burn out their nerves in a heart beat causing death... So there is most likely some outside factor effecting it... take for example a sweater that has alot of static cling....

Best of luck


Anyone have problems with cell phones turning the oven on?
Q. The story hit the New York Times. --- if true it's pretty dangerous.

-------------
August 23, 2009
ABOUT NEW YORK
Hello, Oven? It�s Phone. Now Let�s Get Cooking!
By JIM DWYER
First the superintendent and the handyman checked the oven from top to bottom. Then they tested the electrical outlet that supplied ignition power for the oven. Everything worked. Finally, they gave their verdict to the tenant, Andrei Melnikov.
It was simply not possible, they said, that his oven, a Magic Chef made by Maytag, had turned itself on full blast, as Mr. Melnikov maintained.
�Maybe you imagined it,� the handyman said.
Mr. Melnikov picked up a warped meat thermometer, its plastic casing melted.
�How did I imagine this?� he asked.
�He told me, �Probably you don�t remember pushing the button,� � Mr. Melnikov said.
Actually, Mr. Melnikov and his wife, Lina, almost never cook in the oven, which was new when they moved into their apartment in Gravesend, Brooklyn, three years ago. Like many people who live with more stuff than space, they store kitchenware in it.
On the day it turned itself on, Mr. Melnikov recalled, his cellphone had rung in the kitchen. He talked for about 10 minutes. Then he smelled smoke. The oven was roaring. The thermometer was in flames.
�Maybe the ringing cellphone turned it on,� Mr. Melnikov suggested to the two men.
They scoffed.
He laid the phone next to the stove. They dialed it. Suddenly, the electronic control on the stovetop beeped. The digital display changed from a clock to the word �high.� As the phone was ringing, the broiler was heating up.
Three other apartments in the building are fitted with the same make and model oven: Maytag Model CGR1425ADW. �My phone turned on all of them,� Mr. Melnikov reported. �One apartment had a General Electric. It didn�t work on that one.�
On Thursday, Mr. Melnikov welcomed a skeptical visitor � me � into his kitchen.
�Will it happen now?� I asked.
�Sure,� he said.
He reconnected the oven, which he had unplugged from the wall for safety, and turned the gas valve on. I dialed his number. The electronic pad on the oven beeped, the word �high� appeared, and the phone rang. The flames were licking from the broiler jets.
�It goes right to the high setting on the broiler,� he said. �It prefers high.�
He disconnected the oven. I asked him to show me again, and he cheerfully started over. Once again, a call to his cellphone turned it on.
Maytag learned about the rogue oven from a report on WINS 1010, which broke the story last week. A company technician confirmed the problem.
�In our experience, this situation is highly unusual,� said Jill M. Saletta, a spokeswoman for Maytag. �We have offered to replace the unit with a brand-new one, at no cost, and will be taking the old unit to fully test in our lab.� Any other ovens with the same problem will also be replaced, she said.
City fire marshals came to the apartment Friday and saw a demonstration. The federal Consumer Product Safety Commission has written to Mr. Melnikov for information. Ms. Saletta said all Maytag�s appliances are tested and meet safety standards set by Underwriters Laboratory and the American National Standards Institute.
The landlord of the building, Arkadiy Eydlin, said he bought the Maytag ovens about four years ago. �Maybe around $500, $400 each,� he said. �It�s not the most expensive, and it�s not the cheapest one.�
Cellphones, which send signals at up to 3 watts, often create electromagnetic interference with baby monitors, computer speakers and car radios, so it�s not surprising that they might also affect an oven�s electronic controls. People with heart pacemakers are cautioned not to carry phones in pockets over the implant. Engineers for Consumer Reports say that it is possible that Mr. Melnikov�s cellphone induced voltages in the keypad of the oven.
Whatever the exact mechanism, the evidence is strong that these Maytag models are vulnerable to cellphones � and not just the one owned by Mr. Melnikov. The superintendent was able to turn on the oven in his own apartment by calling his own cellphone, which is a Samsung. Mr. Melnikov has a Sony Ericsson PDA.
�I couldn�t afford it, but it was a gift, like four years ago,� he said. �It was maybe $700 then. More than the oven.�
Mr. Melnikov, 35, who emigrated from Russia in 2000, runs a company that sets up computers, networks and security systems. His apartment is crowded with electronics gear. The oven fire unnerved him and his wife. �Not for the material things,� he said. �I have three chinchillas.�
The next big cooking holiday in their home will be Thanksgiving. �Actually, right now, cooking turkey, it�s easier than ever,� Mr. Melnikov said. �It takes just one phone call.�
-------------------------

A. No but something almost as crazy happens in my apartment.
My LG HD remote regulates my Haier air conditioner.Crazy!!





Powered by Yahoo! Answers

Sunday, January 13, 2013

Sub-woofer is making a horrible noise when no media is playing?

Q. I have never had any problems with this subwoofer before. I recently moved houses and setup my system there. Everything seemed to be working beautifully until I woke up in the middle of the night to horrible feedback coming from the subwoofer. I immediately turned the power off and it stopped. So, I tried to switch the subwoofer to "Auto" mode which kind of puts the speaker in a sleep mode until it is being used. This also did not solve the problem. When music is played on subwoofer, it sounds great, but once it ends, after a while, a feedback "beat" is heard and repeated over and over. Any suggestions? This wasn't happening before the move.

A. Hmmm, it could be many things... I have a JBL speaker system with a powered sub and I had a similar type of feedback humm, but I discovered it had to do with the auto sleep mode. Oddly enough (like you) this only happened to me after moving into a new home, go figure! So aside from some trial and error with the power save feature of the subwoofer, it's time to dig deeper.

Do you get normal results when you run a test-tone test, if your head unit has this feature? First, if you don't own a second one, see if you can borrow another subwoofer and swap it out temporarily. Try to rule out an issue with the speaker itself, if another sub does the same, you have an issue with your head unit or cabling or power. Are you using a halfway decent power distribution system or power strip, like a monster power strip with good noise filtering? In the new house, where you set up your system, are there any sources of interference nearby like from utilities or appliances or computers? Are you using a good quality cable to conect the sub to the head unit? I realize it worked fine before, but it could be a cabling issue if there's an external electromagnetic interference problem near the new home that didn't exist at the old home, like from nearby communications equipment, alarm systems, wireless networks, cordless phones, baby monitors, wireless CCTV systems, etc.

Or it could be dirty power for these same types of reasons, so be sure to use a good power strip/filter. Expect to spend a few hundred dollars on a good one. Myself, I use the Monster Power HTS 3600. And make sure the outlets where you have everything plugged in is properly grounded. Use a tester or have someone who knows home electrical confirm it for you. Ideally, this will also be a dedicated 15 or 20 amp outlet with nothing else on it like lighting, etc.


How do I fix the buzz on my PS3?
Q. Ever since I got my PS3 in November of last year, it's had a light buzz that annoys the crap out of me. I've put it on three different TVs, and they all share the buzz problem, as well as lines scrolling through the picture. My question is, simply: How do I get my sound and picture working normally?

A. I had this issue as well. It seems to be interference by another electrical device. In my case it was the baby monitor. I found a new plug for that. Does your PS3 share a power outlet with something else? If so, try putting your PS3 on a power bar, or its own outlet.


How do I improve a routour range and speed and it has no attena?
Q. It's a at&t model 2wire

A. Try placing the router in a higher central location, avoid physical obstructions whenever possible, also avoid reflective surfaces whenever possible. Some Wi-Fi signals literally bounce off of windows, mirrors, metal file cabinets and stainless steel countertops, lessening both network range and performance.

Install the router at least 3 feet away from other home appliances such microwave ovens, cordless telephones, baby monitors, and home automation equipment like X-10 devices.

Likewise, install the unit away from other electrical equipment that also generates interference, such as electric fans, motors, and flourescent lighting.


Is there anyway to boost my reception in my basement?
Q. I get decent signal on the main floor and when i go in the basement my signal sucks. I have Verizon

A. Well here is some information that tells you what interferes with wireless signal:

Sources of interference for wireless devices and networks

The farther away the interference source, the less likely it is to cause an issue. The following items can cause interference with wireless communication:

* Microwave ovens: Placing your computer, Bluetooth wireless device, or AirPort base station near a microwave oven that is in use may cause interference.
* Direct Satellite Service (DSS) RF leakage: The coax cable that comes with certain types of satellite dishes may cause interference. Obtain newer cables if you suspect RF leakage.
* Certain electrical devices such as power lines, electrical railroad tracks, and power stations.
* 2.4 GHz or 5 GHz phones: A cordless telephone that operates in this range may cause interference with wireless devices or networks when used.
* Metal objects: If possible, move metal objects or change the placement of the computer, wireless device or wireless access point so the path between your computer and the wireless device or wireless access point is free from metal objects that may cause interference.
* Video senders (transmitters/receivers) that operate in the 2.4 GHz or 5 GHz bandwidth.
* Wireless speakers that operate in the 2.4 GHz or 5 GHz bandwidth.
* Certain external monitors and LCD displays: Certain displays may emit harmonic interference, especially in the 2.4GHz bandwidth between channels 11 and 14. This interference may be at its worst if you have a portable computer with the lid closed and an external monitor connected to it. Try changing your access point to use 5 Ghz or a lower 2.4 GHz channel.
* Any other "wireless" devices that operate in the 2.4 GHz or 5 GHz bandwidth (microwaves, cameras, baby monitors, and so on).

Note: Some devices may not overtly state that they operate in the 2.4 GHz or 5 GHz bandwidth. The operations manual should indicate the frequencies the device uses to operate. These may be referred to as "Dual Band" or "Wireless" devices.

Effect of home and office elements on wireless communication
Where you are located and what materials you are surrounded by can affect your wireless networking performance or Bluetooth wireless device. The table below shows common elements and their potential for interference.
Type of Barrier Interference Potential
Wood Low Interference
Plaster Low Interference
Synthetic material Low Interference
Glass Low Interference
Water Medium Interference
Bricks Medium Interference
Marble Medium Interference
Paper rolls High Interference
Concrete High Interference
Bulletproof glass High Interference
Metal Very high Interference

I would say your problem is Concrete because of the bricks, which are almost the hardest next to metal and bulletproof glass... But if you can get a wireless access point and get it at the entrance of the basement, it will take the signal from your router and extend it into your basement. You can take these WAPoints and move them around to see where you get the best signal in your basement with where the access point extends the signal too. I hope this helps. Also some of the other items listed above can cause inteference but I would suspect the concrete and start there. There not too expensive and you can have more than one.





Powered by Yahoo! Answers

Thursday, January 10, 2013

How do I improve a routour range and speed and it has no attena?

Q. It's a at&t model 2wire

A. Try placing the router in a higher central location, avoid physical obstructions whenever possible, also avoid reflective surfaces whenever possible. Some Wi-Fi signals literally bounce off of windows, mirrors, metal file cabinets and stainless steel countertops, lessening both network range and performance.

Install the router at least 3 feet away from other home appliances such microwave ovens, cordless telephones, baby monitors, and home automation equipment like X-10 devices.

Likewise, install the unit away from other electrical equipment that also generates interference, such as electric fans, motors, and flourescent lighting.


Is there anyway to boost my reception in my basement?
Q. I get decent signal on the main floor and when i go in the basement my signal sucks. I have Verizon

A. Well here is some information that tells you what interferes with wireless signal:

Sources of interference for wireless devices and networks

The farther away the interference source, the less likely it is to cause an issue. The following items can cause interference with wireless communication:

* Microwave ovens: Placing your computer, Bluetooth wireless device, or AirPort base station near a microwave oven that is in use may cause interference.
* Direct Satellite Service (DSS) RF leakage: The coax cable that comes with certain types of satellite dishes may cause interference. Obtain newer cables if you suspect RF leakage.
* Certain electrical devices such as power lines, electrical railroad tracks, and power stations.
* 2.4 GHz or 5 GHz phones: A cordless telephone that operates in this range may cause interference with wireless devices or networks when used.
* Metal objects: If possible, move metal objects or change the placement of the computer, wireless device or wireless access point so the path between your computer and the wireless device or wireless access point is free from metal objects that may cause interference.
* Video senders (transmitters/receivers) that operate in the 2.4 GHz or 5 GHz bandwidth.
* Wireless speakers that operate in the 2.4 GHz or 5 GHz bandwidth.
* Certain external monitors and LCD displays: Certain displays may emit harmonic interference, especially in the 2.4GHz bandwidth between channels 11 and 14. This interference may be at its worst if you have a portable computer with the lid closed and an external monitor connected to it. Try changing your access point to use 5 Ghz or a lower 2.4 GHz channel.
* Any other "wireless" devices that operate in the 2.4 GHz or 5 GHz bandwidth (microwaves, cameras, baby monitors, and so on).

Note: Some devices may not overtly state that they operate in the 2.4 GHz or 5 GHz bandwidth. The operations manual should indicate the frequencies the device uses to operate. These may be referred to as "Dual Band" or "Wireless" devices.

Effect of home and office elements on wireless communication
Where you are located and what materials you are surrounded by can affect your wireless networking performance or Bluetooth wireless device. The table below shows common elements and their potential for interference.
Type of Barrier Interference Potential
Wood Low Interference
Plaster Low Interference
Synthetic material Low Interference
Glass Low Interference
Water Medium Interference
Bricks Medium Interference
Marble Medium Interference
Paper rolls High Interference
Concrete High Interference
Bulletproof glass High Interference
Metal Very high Interference

I would say your problem is Concrete because of the bricks, which are almost the hardest next to metal and bulletproof glass... But if you can get a wireless access point and get it at the entrance of the basement, it will take the signal from your router and extend it into your basement. You can take these WAPoints and move them around to see where you get the best signal in your basement with where the access point extends the signal too. I hope this helps. Also some of the other items listed above can cause inteference but I would suspect the concrete and start there. There not too expensive and you can have more than one.


Does a low signal strength make my connection worse in Modern Warfare 3 on PS3?
Q. I meant low signal strength from my router.

A. Yes. The lower the strength of the signal, the slower it will be.

To increase signal strength, you need to remove sources of EMI (electromagnetic interference) such as baby monitors, 2.4GHz phones, microwaves as well as possibly moving the router to a better spot to decrease dead zones in your coverage area. You can try moving the router closer to the PS3 if that's an option.

Other options include installing a bigger antenna, a directional antenna or adding a wireless access point.

And another way is to eliminate WiFi completely by using Powerline technology. You can use the electrical wires of your house to transmit data. You would need an adapter on each end, though.


My wifi is very slow at night, fast in morning?
Q. Recently my wifi started crawling at night, while connected speeds were normal, or above expected. Speedtest,net results used to top out at 9mbps, now connected is ~13, but wifi is ~1. Actually wifi starts at 2-3 mbps during the test but drops to around 1mbps by the end of the test.

I can try wifi in the morning and the speed is back to 13-14mbps.

I've reset the router, changed network names, but wifi is still slow in evenings while connected speeds are super fast.

This is a Cisco E1000 router. I disabled QOS which might prioritize certain items. The router shows only 2 connections, both of wich are mine.

Any help would be greatly appreciated.
Thanks for your responses so far. I will add that the network is password protected and i have confirmed via the router that there are only 2 connections, my desktop and iPad.

A. Assuming your wireless network is secured and you don't have leaches sucking up your bandwidth then I would suspect wireless interference.

By nature, interference in wireless systems causes problems with smooth, consistent speeds.

Many wireless connections experience interference from microwave ovens, cordless phones, baby monitors and other wireless devices which interfere with the 2.4 GHz band.

Dual band routers have multiple wireless radios enabling broadcast on the 2.4 GHz and 5 GHz bands simultaneously.

Using the 5 GHz band cuts down on interference from cordless phones and microwave ovens..

Not all devices can use the 5 GHz frequency. Many laptops and other devices only operate at 2.4 GHz. Thus the need for dual band routers.

What all this jargon means is that you might be experiencing wireless interference which is slowing do your WiFi connections.

Because your problem is time based, are there any heavy electrical loads that come on when you experience problems? Things such as heaters, air conditioners, pumps, etc.

You can try to reposition the antennas on the router or your wireless adapter.

Moving one or the other away from dense walls or electrical interference would also help.

Wireless connections are never as fast or consistent as wired connections. If your interference is on the 2.4 GHz band and your devices support 5 GHz then a new dual band router might help.

There are also various ways to extend a Internet connection to areas with a weak wireless signal.

Devices such as wireless extenders can expand your wireless range if need be. http://www.amazon.com/gp/product/B004YAYM06/ref=as_li_ss_tl?ie=UTF8&tag=excharge-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B004YAYM06

The wireless range extender receives weak wireless signals and repeats them to extend the signal range to greater distances. Some models include 4 Ethernet ports in addition to the wireless radio.

The best solution would be to use a wired (Ethernet) connection between your devices and the router.

If it is not feasible to run cables you have other options such as powerline network adapters You plug one in by the router and one in the room where you need access and connect them to the devices with standard Ethernet patch cables. http://isp1.us/reviews/netgear-xavb2101-powerline-adapter/

The network signals are transmitted over your existing home electrical wiring which will not be affected by wireless interference.

Good Luck...





Powered by Yahoo! Answers

Saturday, January 5, 2013

I'm struggling to find a baby monitor that works in our apartment. We've tried 3 kinds and they don't work.?

Q. We always have terrible feedback and pick up other baby monitors, but never our own. I've heard there is a difference in short and long range monitors. Does anyone know anything about this, and if so, are there any monitors you recommend under $40?

A. There are two problems you may be experiencing. The first is your monitor is too low tech and is getting electrical interference or noise from electronics, power lines etc... The second is your monitor may be too "good" and has a large range, which encompasses other parents with monitors on the same frequencies.

Before you buy any monitor, make sure the store will let you return it if there is interference.

First I would try a good "low tech" monitor like the Fisher Price Surround Sound Lights and Sounds Monitor, $27.99 for 1 Receiver. It uses the 49 MHz band, which not many other things use now and could be the least expensive answer to your troubles.

If that doesn't work for you, skip the 900 MHz monitors and try the 2.45 - 2.54 GHz models, there is almost no difference in cost and a much better chance at clear reception. Models to look for are: The First Years True Choice ($40), Graco I-Vibe, Summer Infant Simply Clear Digital Audio Monitor
($49.99)

If these don't work the next level would be monitors with DECT technology. These are "guaranteed to be interference-free, and most clients who have them have had great luck with them. These usually run $80 and up. But I doubt you will need to go this route.

Hope this helps,

Alan


Sub-woofer is making a horrible noise when no media is playing?
Q. I have never had any problems with this subwoofer before. I recently moved houses and setup my system there. Everything seemed to be working beautifully until I woke up in the middle of the night to horrible feedback coming from the subwoofer. I immediately turned the power off and it stopped. So, I tried to switch the subwoofer to "Auto" mode which kind of puts the speaker in a sleep mode until it is being used. This also did not solve the problem. When music is played on subwoofer, it sounds great, but once it ends, after a while, a feedback "beat" is heard and repeated over and over. Any suggestions? This wasn't happening before the move.

A. Hmmm, it could be many things... I have a JBL speaker system with a powered sub and I had a similar type of feedback humm, but I discovered it had to do with the auto sleep mode. Oddly enough (like you) this only happened to me after moving into a new home, go figure! So aside from some trial and error with the power save feature of the subwoofer, it's time to dig deeper.

Do you get normal results when you run a test-tone test, if your head unit has this feature? First, if you don't own a second one, see if you can borrow another subwoofer and swap it out temporarily. Try to rule out an issue with the speaker itself, if another sub does the same, you have an issue with your head unit or cabling or power. Are you using a halfway decent power distribution system or power strip, like a monster power strip with good noise filtering? In the new house, where you set up your system, are there any sources of interference nearby like from utilities or appliances or computers? Are you using a good quality cable to conect the sub to the head unit? I realize it worked fine before, but it could be a cabling issue if there's an external electromagnetic interference problem near the new home that didn't exist at the old home, like from nearby communications equipment, alarm systems, wireless networks, cordless phones, baby monitors, wireless CCTV systems, etc.

Or it could be dirty power for these same types of reasons, so be sure to use a good power strip/filter. Expect to spend a few hundred dollars on a good one. Myself, I use the Monster Power HTS 3600. And make sure the outlets where you have everything plugged in is properly grounded. Use a tester or have someone who knows home electrical confirm it for you. Ideally, this will also be a dedicated 15 or 20 amp outlet with nothing else on it like lighting, etc.


How do I fix the buzz on my PS3?
Q. Ever since I got my PS3 in November of last year, it's had a light buzz that annoys the crap out of me. I've put it on three different TVs, and they all share the buzz problem, as well as lines scrolling through the picture. My question is, simply: How do I get my sound and picture working normally?

A. I had this issue as well. It seems to be interference by another electrical device. In my case it was the baby monitor. I found a new plug for that. Does your PS3 share a power outlet with something else? If so, try putting your PS3 on a power bar, or its own outlet.


How do I improve a routour range and speed and it has no attena?
Q. It's a at&t model 2wire

A. Try placing the router in a higher central location, avoid physical obstructions whenever possible, also avoid reflective surfaces whenever possible. Some Wi-Fi signals literally bounce off of windows, mirrors, metal file cabinets and stainless steel countertops, lessening both network range and performance.

Install the router at least 3 feet away from other home appliances such microwave ovens, cordless telephones, baby monitors, and home automation equipment like X-10 devices.

Likewise, install the unit away from other electrical equipment that also generates interference, such as electric fans, motors, and flourescent lighting.





Powered by Yahoo! Answers

Saturday, December 8, 2012

How do I improve a routour range and speed and it has no attena?

Q. It's a at&t model 2wire

A. Try placing the router in a higher central location, avoid physical obstructions whenever possible, also avoid reflective surfaces whenever possible. Some Wi-Fi signals literally bounce off of windows, mirrors, metal file cabinets and stainless steel countertops, lessening both network range and performance.

Install the router at least 3 feet away from other home appliances such microwave ovens, cordless telephones, baby monitors, and home automation equipment like X-10 devices.

Likewise, install the unit away from other electrical equipment that also generates interference, such as electric fans, motors, and flourescent lighting.


Is there anyway to boost my reception in my basement?
Q. I get decent signal on the main floor and when i go in the basement my signal sucks. I have Verizon

A. Well here is some information that tells you what interferes with wireless signal:

Sources of interference for wireless devices and networks

The farther away the interference source, the less likely it is to cause an issue. The following items can cause interference with wireless communication:

* Microwave ovens: Placing your computer, Bluetooth wireless device, or AirPort base station near a microwave oven that is in use may cause interference.
* Direct Satellite Service (DSS) RF leakage: The coax cable that comes with certain types of satellite dishes may cause interference. Obtain newer cables if you suspect RF leakage.
* Certain electrical devices such as power lines, electrical railroad tracks, and power stations.
* 2.4 GHz or 5 GHz phones: A cordless telephone that operates in this range may cause interference with wireless devices or networks when used.
* Metal objects: If possible, move metal objects or change the placement of the computer, wireless device or wireless access point so the path between your computer and the wireless device or wireless access point is free from metal objects that may cause interference.
* Video senders (transmitters/receivers) that operate in the 2.4 GHz or 5 GHz bandwidth.
* Wireless speakers that operate in the 2.4 GHz or 5 GHz bandwidth.
* Certain external monitors and LCD displays: Certain displays may emit harmonic interference, especially in the 2.4GHz bandwidth between channels 11 and 14. This interference may be at its worst if you have a portable computer with the lid closed and an external monitor connected to it. Try changing your access point to use 5 Ghz or a lower 2.4 GHz channel.
* Any other "wireless" devices that operate in the 2.4 GHz or 5 GHz bandwidth (microwaves, cameras, baby monitors, and so on).

Note: Some devices may not overtly state that they operate in the 2.4 GHz or 5 GHz bandwidth. The operations manual should indicate the frequencies the device uses to operate. These may be referred to as "Dual Band" or "Wireless" devices.

Effect of home and office elements on wireless communication
Where you are located and what materials you are surrounded by can affect your wireless networking performance or Bluetooth wireless device. The table below shows common elements and their potential for interference.
Type of Barrier Interference Potential
Wood Low Interference
Plaster Low Interference
Synthetic material Low Interference
Glass Low Interference
Water Medium Interference
Bricks Medium Interference
Marble Medium Interference
Paper rolls High Interference
Concrete High Interference
Bulletproof glass High Interference
Metal Very high Interference

I would say your problem is Concrete because of the bricks, which are almost the hardest next to metal and bulletproof glass... But if you can get a wireless access point and get it at the entrance of the basement, it will take the signal from your router and extend it into your basement. You can take these WAPoints and move them around to see where you get the best signal in your basement with where the access point extends the signal too. I hope this helps. Also some of the other items listed above can cause inteference but I would suspect the concrete and start there. There not too expensive and you can have more than one.


Does a low signal strength make my connection worse in Modern Warfare 3 on PS3?
Q. I meant low signal strength from my router.

A. Yes. The lower the strength of the signal, the slower it will be.

To increase signal strength, you need to remove sources of EMI (electromagnetic interference) such as baby monitors, 2.4GHz phones, microwaves as well as possibly moving the router to a better spot to decrease dead zones in your coverage area. You can try moving the router closer to the PS3 if that's an option.

Other options include installing a bigger antenna, a directional antenna or adding a wireless access point.

And another way is to eliminate WiFi completely by using Powerline technology. You can use the electrical wires of your house to transmit data. You would need an adapter on each end, though.


What is up with this?!!?
Q. You know how certain electrical appliances will have static feedback when you move around them, or get close to them? Like radios for instance? For some reason, it is really, really bad with me. More than anyone I know. My baby monitor will fuzz in and out with my motions even when I am in a different room. I do have an extra electrical connection in my heart that causes an irregular beat. Do you think that has something to do with it?

A. Every living human on this planet has a small electrical current flowing through them.... but to generate the EM field to effect things to that degree is not only improbable but impossible if you are alive... some scientific tests may show slight interference from the human body but anyone with that level would burn out their nerves in a heart beat causing death... So there is most likely some outside factor effecting it... take for example a sweater that has alot of static cling....

Best of luck





Powered by Yahoo! Answers