best baby monitor dual receiver image
Trevor
We have a Belkin N450 Router. We have at least 10 Devices connected and the Router can handle it, we want to buy a new one of upgrade it. We have a Computer, 2 Ipads, 3 Iphones/Ipod, Xbox, Kindle Fire. What would you recommend.
Answer
Upgrading the router will not improve your Internet connection.
How fast is your Internet connection?
You can measure your Internet speed here: http://speedtest.net
That being said,
A wireless router connects two separate networks and manages the traffic between them.
In most home network applications the router connects your local group of computers and devices known as the LAN with the Internet, commonly called the WAN or Wide Area Network.
For example, If you have a 5 Mbps Internet connection, the maximum shared Internet bandwidth available to all of the devices connected to the router will be 5 Mbps.
Any bandwidth others users or devices on your connection are using will be deducted from the total WAN (Internet) bandwidth that is available to you.
If you have a 5 Mbps Internet connection and one user is utilizing 4 Mbps of the bandwidth to stream a Netflix movie, that only leaves 1 Mbps for all of the rest of the users on the LAN.
In simple terms, the more users you have the more speed will be required. Streaming video, such as Netflix and Hulu require a lot of bandwidth. Here are the minimum recommendations from Netflix. https://support.netflix.com/en/node/306
Many people would be likely be surprised at how many active connections their wireless router has. I have dozens. cell phones, tablets, iPods, game consoles, laptops, desktops, ROKU boxes, Internet enabled devices such as TVs and audio receivers, and the list goes on.
Fast wireless routers and connections are designed to stream large files on your LAN quickly. The high speed routers permit fast transfer of files between devices connected to your LAN, however WAN speed is still limited by your ISP. The only way to Improve your Internet speed is to upgrade your plan or switch to a faster ISP.
If you still want to upgrade for other reasons other than Internet speed,
It pretty much comes down to what features you want and how much you want to spend.
As far as the brand goes, the brand is not as important as the model. Some manufacturers release a good model but the next is crap. I would look at the Amazon reviews of models that interest you. Even if you don't buy from Amazon the reviews will tell you a lot about which models to avoid. Look for at least 15 or more reviews with a 4 star or better rating. Read a few and see if they sound like the particular model will work for your application.
For under $50, this Medialink is the most popular and highly reviewed model. http://www.amazon.com/gp/product/B00A3YN0Z0/ref=as_li_ss_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00A3YN0Z0&linkCode=as2&tag=excharge-20
If you want to spend a little more, many routers support "Dual Band". http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&keywords=dual%20band%20router&linkCode=ur2&qid=1374595143&rh=n%3A172282%2Cn%3A541966%2Cn%3A300189%2Ck%3Adual%20band%20router%2Cp_72%3A1248879011&rnid=1248877011&tag=excharge-20
Dual band routers have multiple wireless radios enabling broadcast on the 2.4 GHz and 5 GHz bands simultaneously. Using the 5 GHz band cuts down on interference from cordless phones and microwave ovens.. Not all devices can use the 5 GHz frequency. Many laptops and other devices only operate at 2.4 GHz. Thus the need for dual band routers.
In any case,
You should try to centrally locate your wireless router or gateway up high and away from dense walls and electrical and 2.4 GHz wireless interference such as microwave ovens, cordless phones, baby monitors, etc.
Wireless signals, including 2.4 and 5 GHz, are affected by many factors including distance, wall density, electrical interference, directional antenna range, etc.
All of these factors will affect your actual wireless range. As wireless connection quality varies the connection speeds are renegotiated. The WLAN connection may start at 150 Mbps and end up at less than 10 Mbps or drop entirely.
Your best bet is always a direct Ethernet connection to the router, especially for fixed devices that don't need mobility. Ethernet is unaffected by wireless interference and will give you a rock solid, stable network connection.
Good Luck...
Upgrading the router will not improve your Internet connection.
How fast is your Internet connection?
You can measure your Internet speed here: http://speedtest.net
That being said,
A wireless router connects two separate networks and manages the traffic between them.
In most home network applications the router connects your local group of computers and devices known as the LAN with the Internet, commonly called the WAN or Wide Area Network.
For example, If you have a 5 Mbps Internet connection, the maximum shared Internet bandwidth available to all of the devices connected to the router will be 5 Mbps.
Any bandwidth others users or devices on your connection are using will be deducted from the total WAN (Internet) bandwidth that is available to you.
If you have a 5 Mbps Internet connection and one user is utilizing 4 Mbps of the bandwidth to stream a Netflix movie, that only leaves 1 Mbps for all of the rest of the users on the LAN.
In simple terms, the more users you have the more speed will be required. Streaming video, such as Netflix and Hulu require a lot of bandwidth. Here are the minimum recommendations from Netflix. https://support.netflix.com/en/node/306
Many people would be likely be surprised at how many active connections their wireless router has. I have dozens. cell phones, tablets, iPods, game consoles, laptops, desktops, ROKU boxes, Internet enabled devices such as TVs and audio receivers, and the list goes on.
Fast wireless routers and connections are designed to stream large files on your LAN quickly. The high speed routers permit fast transfer of files between devices connected to your LAN, however WAN speed is still limited by your ISP. The only way to Improve your Internet speed is to upgrade your plan or switch to a faster ISP.
If you still want to upgrade for other reasons other than Internet speed,
It pretty much comes down to what features you want and how much you want to spend.
As far as the brand goes, the brand is not as important as the model. Some manufacturers release a good model but the next is crap. I would look at the Amazon reviews of models that interest you. Even if you don't buy from Amazon the reviews will tell you a lot about which models to avoid. Look for at least 15 or more reviews with a 4 star or better rating. Read a few and see if they sound like the particular model will work for your application.
For under $50, this Medialink is the most popular and highly reviewed model. http://www.amazon.com/gp/product/B00A3YN0Z0/ref=as_li_ss_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00A3YN0Z0&linkCode=as2&tag=excharge-20
If you want to spend a little more, many routers support "Dual Band". http://www.amazon.com/s/?_encoding=UTF8&camp=1789&creative=390957&keywords=dual%20band%20router&linkCode=ur2&qid=1374595143&rh=n%3A172282%2Cn%3A541966%2Cn%3A300189%2Ck%3Adual%20band%20router%2Cp_72%3A1248879011&rnid=1248877011&tag=excharge-20
Dual band routers have multiple wireless radios enabling broadcast on the 2.4 GHz and 5 GHz bands simultaneously. Using the 5 GHz band cuts down on interference from cordless phones and microwave ovens.. Not all devices can use the 5 GHz frequency. Many laptops and other devices only operate at 2.4 GHz. Thus the need for dual band routers.
In any case,
You should try to centrally locate your wireless router or gateway up high and away from dense walls and electrical and 2.4 GHz wireless interference such as microwave ovens, cordless phones, baby monitors, etc.
Wireless signals, including 2.4 and 5 GHz, are affected by many factors including distance, wall density, electrical interference, directional antenna range, etc.
All of these factors will affect your actual wireless range. As wireless connection quality varies the connection speeds are renegotiated. The WLAN connection may start at 150 Mbps and end up at less than 10 Mbps or drop entirely.
Your best bet is always a direct Ethernet connection to the router, especially for fixed devices that don't need mobility. Ethernet is unaffected by wireless interference and will give you a rock solid, stable network connection.
Good Luck...
Is there anyway to boost my reception in my basement?
rynearson9
I get decent signal on the main floor and when i go in the basement my signal sucks. I have Verizon
Answer
Well here is some information that tells you what interferes with wireless signal:
Sources of interference for wireless devices and networks
The farther away the interference source, the less likely it is to cause an issue. The following items can cause interference with wireless communication:
* Microwave ovens: Placing your computer, Bluetooth wireless device, or AirPort base station near a microwave oven that is in use may cause interference.
* Direct Satellite Service (DSS) RF leakage: The coax cable that comes with certain types of satellite dishes may cause interference. Obtain newer cables if you suspect RF leakage.
* Certain electrical devices such as power lines, electrical railroad tracks, and power stations.
* 2.4 GHz or 5 GHz phones: A cordless telephone that operates in this range may cause interference with wireless devices or networks when used.
* Metal objects: If possible, move metal objects or change the placement of the computer, wireless device or wireless access point so the path between your computer and the wireless device or wireless access point is free from metal objects that may cause interference.
* Video senders (transmitters/receivers) that operate in the 2.4 GHz or 5 GHz bandwidth.
* Wireless speakers that operate in the 2.4 GHz or 5 GHz bandwidth.
* Certain external monitors and LCD displays: Certain displays may emit harmonic interference, especially in the 2.4GHz bandwidth between channels 11 and 14. This interference may be at its worst if you have a portable computer with the lid closed and an external monitor connected to it. Try changing your access point to use 5 Ghz or a lower 2.4 GHz channel.
* Any other "wireless" devices that operate in the 2.4 GHz or 5 GHz bandwidth (microwaves, cameras, baby monitors, and so on).
Note: Some devices may not overtly state that they operate in the 2.4 GHz or 5 GHz bandwidth. The operations manual should indicate the frequencies the device uses to operate. These may be referred to as "Dual Band" or "Wireless" devices.
Effect of home and office elements on wireless communication
Where you are located and what materials you are surrounded by can affect your wireless networking performance or Bluetooth wireless device. The table below shows common elements and their potential for interference.
Type of Barrier Interference Potential
Wood Low Interference
Plaster Low Interference
Synthetic material Low Interference
Glass Low Interference
Water Medium Interference
Bricks Medium Interference
Marble Medium Interference
Paper rolls High Interference
Concrete High Interference
Bulletproof glass High Interference
Metal Very high Interference
I would say your problem is Concrete because of the bricks, which are almost the hardest next to metal and bulletproof glass... But if you can get a wireless access point and get it at the entrance of the basement, it will take the signal from your router and extend it into your basement. You can take these WAPoints and move them around to see where you get the best signal in your basement with where the access point extends the signal too. I hope this helps. Also some of the other items listed above can cause inteference but I would suspect the concrete and start there. There not too expensive and you can have more than one.
Well here is some information that tells you what interferes with wireless signal:
Sources of interference for wireless devices and networks
The farther away the interference source, the less likely it is to cause an issue. The following items can cause interference with wireless communication:
* Microwave ovens: Placing your computer, Bluetooth wireless device, or AirPort base station near a microwave oven that is in use may cause interference.
* Direct Satellite Service (DSS) RF leakage: The coax cable that comes with certain types of satellite dishes may cause interference. Obtain newer cables if you suspect RF leakage.
* Certain electrical devices such as power lines, electrical railroad tracks, and power stations.
* 2.4 GHz or 5 GHz phones: A cordless telephone that operates in this range may cause interference with wireless devices or networks when used.
* Metal objects: If possible, move metal objects or change the placement of the computer, wireless device or wireless access point so the path between your computer and the wireless device or wireless access point is free from metal objects that may cause interference.
* Video senders (transmitters/receivers) that operate in the 2.4 GHz or 5 GHz bandwidth.
* Wireless speakers that operate in the 2.4 GHz or 5 GHz bandwidth.
* Certain external monitors and LCD displays: Certain displays may emit harmonic interference, especially in the 2.4GHz bandwidth between channels 11 and 14. This interference may be at its worst if you have a portable computer with the lid closed and an external monitor connected to it. Try changing your access point to use 5 Ghz or a lower 2.4 GHz channel.
* Any other "wireless" devices that operate in the 2.4 GHz or 5 GHz bandwidth (microwaves, cameras, baby monitors, and so on).
Note: Some devices may not overtly state that they operate in the 2.4 GHz or 5 GHz bandwidth. The operations manual should indicate the frequencies the device uses to operate. These may be referred to as "Dual Band" or "Wireless" devices.
Effect of home and office elements on wireless communication
Where you are located and what materials you are surrounded by can affect your wireless networking performance or Bluetooth wireless device. The table below shows common elements and their potential for interference.
Type of Barrier Interference Potential
Wood Low Interference
Plaster Low Interference
Synthetic material Low Interference
Glass Low Interference
Water Medium Interference
Bricks Medium Interference
Marble Medium Interference
Paper rolls High Interference
Concrete High Interference
Bulletproof glass High Interference
Metal Very high Interference
I would say your problem is Concrete because of the bricks, which are almost the hardest next to metal and bulletproof glass... But if you can get a wireless access point and get it at the entrance of the basement, it will take the signal from your router and extend it into your basement. You can take these WAPoints and move them around to see where you get the best signal in your basement with where the access point extends the signal too. I hope this helps. Also some of the other items listed above can cause inteference but I would suspect the concrete and start there. There not too expensive and you can have more than one.
Powered by Yahoo! Answers
Title Post: Our Internet Connection is very bad and we are thinking of getting a new router. Any Suggestions.?
Rating: 96% based on 987 ratings. 4,3 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Rating: 96% based on 987 ratings. 4,3 user reviews.
Author: Unknown
Thanks For Coming To My Blog
No comments:
Post a Comment